Gloves — Nitrile
• Knitted nylon/lycra glove
• Nitrile/water based PU palm and finger coating.
• Breathable, Soft and tactile finish
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 3 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 35% polyester + 65% NItrile
• 100% Polyester shell with nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and light engineering.
• Ideal for dry or slightly oily applications.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• 35% polyester + 65% Nitrile
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Sizes S-XL comes in boxes of 100 pieces.
• Size XXL comes in boxes of 90 pieces.
• Powder Free black textured Nitrile Gloves
• CE category III
• Excellent elasticity
• Textured for added grip
• 7 mil Thick (1 mil = 1/1000 of an inch)
• Each glove weighs approx. 7 grams (based on a size large)
• EN ISO 21420: 2020
• EN 388:2016+A1:2018
• Level 0 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 0 - Tear Resistance
• Level 0 - Puncture Resistance
• Level A - TDM Cut Resistance (ISO 13997)
• EN 374-5: 2016
Resistance to Bacteria and Fungi PASS
Resistance to Virus PASS
• EN ISO 374-1:2016+A1:2018 / TYPE B
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).
Ammonium Hydroxide 25%(O) - More than 10 Mins (level 1).
Formaldehyde 37%(T)- More than 480 Mins (level 6).
Hydrogen Peroxide 30%(P) - More than 30 Mins (level 2).
• Nitrile glove
• Flocklined
• Overall length 31.5cm
• A high level of resistance to abrasion, solvents and animal fats.
• Embossed pattern to palm
• Silicon and wax free
EN388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level 1 - Blade Cut Resistance
• Level 0 - Tear Resistance
• Level 1 - Puncture
• Level X - ISO 13997 Blade Cut Resistance
EN ISO 374-5:2016
• Level Pass - Protection against bacteria and fungi
• Level Pass - Protection against viruses
EN ISO 374-1:2016+A1:2018/TYPE A
• Level 6 - n-Heptane (J)
• Level 6 - 40% Sodium Hydroxide (K)
• Level 3 - 96% Sulphuric acid (L)
• Level 5 - 25% Ammonium Hydroxide (O)
• Level 6 - 30% Hydrogen Peroxide (P)
• Level 6 - 37% Formaldehyde (T)
ISO 18889:2019
•Level G2 Protection against liquid pesticides
• 20% polyester + 80% Nitrile
• Heavy duty nitrile fully dipped fingers and palm
• Lightweight for maximum dexterity
• The extended dipping process produces a uniformly thick coverage of nitrile; ideal for the most demanding of applications
• Liquid proof.
• Provides wearer with a combination of durability and comfort
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Powder Free blue textured Nitrile Gloves
• CE category III
• CE class I examination glove
• Excellent elasticity
• Suitable for applications which are visible to the public
catering, beauty and body art sectors.
• Dual labelling. Fulfilling medical requirements in the tattoo and piercing sector
• Skin friendly: free from phthalates/ softeners and allergenic latex proteins
• Tested and certified according to 1935/2004 - suitable for food contact
• AQL 1.5
Chemical - Breakthrough Time
Formaldehyde 37% (T) - More than 480 Mins (Level 6)
Sodium Hydroxide 40% (K) - More than 480 Mins (Level 6)
Hydrogen Peroxide 30% (P) - More than 30 Mins (Level 2)
• EN420: 2003 +A1:2009
• EN ISO 374-1: 2016
• EN ISO 374-5: 2016
• EN 455: 2000
• 100% Nylon seamless shell with nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and light engineering.
• Ideal for dry or slightly oily applications.
• EN ISO 21420:2020
• EN388: 2016+A1:2018
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Excellent protection for heavy duty applications.
• Soft jersey liner for wearer comfort
• Nitrile coating resists puncture cuts and abrasions.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• Good flexibility and comfort.
• Resists abrasion, cuts and punctures.
• General purpose handling in many industrial sectors.
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 1 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• Excellent protection for heavy duty applications.
• Soft jersey liner for wearer comfort
• Nitrile coating resists puncture cuts and abrasions.
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• 100% Nylon seamless shell.
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications
• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
• 100% Nitrile Rubber Coating.
• 100% PVC TPR back of hand protection.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 2 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Para-Aramid 71.2%, Steel 13.5%, Polyester 10.5%, Spandex 8% Liner.
• 100% Nitrile rubber coating.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications.
• EN 388:2016+A1:2018
• Level 4 - Abrasion Resistance
• Level X - Cut resistance (Coupe Test)
• Level 4 - Tear Resistance
• Level 1 - Puncture Resistance
• Level D - TDM Cut Resistance (ISO 13997)
• Nitrile Foam coating
• 15 Gauge - Nylon and Polyester
• Comfortable and breathable for prolonged periods when performing precision tasks
• EN 388: 2016
• Level 4 - Abrasion
• Level X - Cut resistance
• Level 3 - Tear resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance
• Double coated nitrile offers water and oil resistance
• Wet/dry grip
• Washable and can be tumble dried (Follow instructions)
• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance
• EN 511: 2006
• Level X - Convective Cold
• Level 2 - Contact Cold
• Level X - Water Penetration
• This very thin glove offers outstanding comfort, fit and sensitivity for the most delicate handling.
• 18-gauge knitting technology allows this glove to be ultra-thin yet tough.
• Designed for a wide range of lightweight applications in dry or slightly oily environments, it is ideal for workers who need a higher level of fit, touch and
• Ideal for applications where cotton gloves or no gloves at all are used despite the risk of scrapes, blisters and minor injuries.
• The dark liner Is well-suited for environments that present a certain degree of dirt.
• EN388:2003
• Level 2- Abrasion
• Level 1 - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
Grey - Palm coated foam nitrile with a seamless knitted liner
• The original nitrile foam glove
• Highly versatile solution for precision assembly and general handling
• Perfect balance between comfort, dexterity and protection
• Advanced Knitting Technology to increase stretch and flexibility in high-stress areas
EN388
3.1.3.1
Antistatic according to EN1149
• Bare-hand -like comfort and tactility with high durability
• Ultra-thin Nitrile Foam FORTIX coating lasts up to x3 longer than comparable coatings
• 20% more breathable coating than earlier formulation, for cooler and drier hands
• Seamless 18-gauge nylon-spandex liner has a bare-hand feel, offering breathability, comfort and enhanced fingertip sensitivity for precision tasks
• Silicone free material: for no transfer of silicone containments to metal parts prior to painting
• Ideal solution for workers doing general handling or assembling tasks
•Improved durability and grip: These HyFlex gloves’ FORTIX Abrasion Resistance Technology delivers 2x more grip and ensures ANSI/EN compliant abrasion resistance (vs. previous technology version)
•Advanced ergonomics: ERGOFORM Ergonomic Design Technology ensures a fit shaped to natural hand contours
•Elevated comfort: HyFlex 11-840 safety gloves’ ZONZ Comfort Fit Technology relieves tension,
for optimal comfort
•Guaranteed skin-friendliness and cleanliness: HyFlex 11-840 PPE gloves benefit from Dermatest certification and an impurity-extracting proprietary washing process
•Reduced contaminants: Silicone-free, they prevent contaminant transfer to metal before painting
•Certified harm-free: They are also Oeko-Tex -approved, certifying them free of substances
harmful to human health
• Foam nitrile palm coated
• Nylon Spandex Liner
• 15 gauge
•Food safe
• Silicone free material: for no transfer of silicone containments to metal parts prior to painting
• EN 388:2016 Protective gloves against mechanical risks 4131A
• EN 407 Protective gloves against thermal risks X1XXXX
•Heightened defences: HyFlex 11-849 safety gloves’ fully dipped design ensures 360° protection from light scratches and dirt
•Improved durability: Their FORTIX Abrasion Resistance nitrile foam coating guarantees ANSI/EN-compliant abrasion resistance
•Enhanced grip: HyFlex 11-849 safety gloves come with 2x more grip, for better performance in dry or slightly oily conditions
•Reduced contaminants: HyFlex 11-849 industrial working gloves are silicone-free, avoiding contaminant transfer to metal before painting
•Certified harm-free: Dermatest and Oeko-Tex certification ensure these PPE gloves are skin friendly and free of harmful substances
•Elevated comfort: These HyFlex gloves’ Spandex and nylon liner is shaped to natural hand
contours
• Foam nitrile palm coated
•Fully coated nitrile
• Nylon Spandex Liner
• 18 gauge
•Food safe
• Silicone free material: for no transfer of silicone containments to metal parts prior to painting
• EN 388:2016 Protective gloves against mechanical risks 4121A
• EN 407 Protective gloves against thermal risks X1XXXX
• High-comfort nitrile chemical resistant glove for a wide range of applications, covering to the top of the elbow
• High performance nitrile compound provides an outstanding combination of chemical resistance and strength, for optimal results in wet or dry work environments
• High levels of flexibility, comfort, and dexterity
• Suitable for heavy-duty cleaning applications
• No inner cotton flocking, reducing risk of lint contamination and making it ideal for production areas sensitive to the introduction of external impurities
• Sand patch finish giving the glove a smooth surface that decreases
• Indirect costs, thanks to fewer rejects of fragile parts
• Fully reusable, with an unequalled abrasion resistance
• 18 (457mm) length
• Acceptable quality level (AQL): 0.65
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AGJKLPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements
• Food safe
• EN 388:2016 Protective gloves against mechanical risks 4102X
• Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 2- Puncture
• Level X- ISO 13997 Cut Resitance
• Lightweight reusable, nitrile gloves designed specifically for food processing and handling
• Improved grip with diamond pattern surfacing for unmatched grip in wet and oily conditions
• Outstanding flexibility and dexterity, even at low temperatures
• Liquid-proof VersaTouch can be used on their own or as outer gloves over thermal liners or cut resistant gloves
• Latex-free formulation presents no risk of Type 1 allergies
The ideal solution to mitigate static build up when working with chemicals and liquids in environments with static hazards or high explosive risks
•Nitrile barrier provides advanced chemical protection from many frequently used chemicals.
•Unique Nitrile composition which allows effective dissipation of static build up. Vertical resistance <1x10⁸
•High performance Nitrile compound offers a far superior snag, puncture and abrasion protection compared with rubber or Neoprene gloves
•Reverse lozenge palm finish for improved dry/wet grip
•Foldable cuff gutter to prevent dripping on the forearm
•Antistatic flocking layer for ease of donning/doffing and moisture management
• 330mm length
•EN 16350:2014 Protective gloves. Electrostatic properties
•EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOPT
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
•EN 388:2016 Protective gloves against mechanical risks 4101X
•Level 4- Abrasion
• Level 1- Cut Resistance
• Level 0- Tear Resistance
• Level 1- Puncture
•Level X- ISO 13997 Cut Resistance
