•Extreme Chemical protection:AlphaTec® 53-002 gloves achieving 17 out of 18 chemicals on EN
374:2016 with 16 being at class 6 >480 minutes and 16 out of 18 > class 2 against ASTM F739 with a
10x lower limit to pass.

•Elevated comfort and dexterity: unique manufacturing process for optimized fit with raised
diamond grip for secure performance in a wide range of scenarios.

•Improved durability: They also possess EN 388- compliant abrasion resistance for better mechanical
protection.

•Specialized protection: And anti-static according to EN 1149-3 standards preventing workplace
injuries.

•MICROCHEM™ Chemical Barrier Technology: Unique multi-layer rubber polymer and plastic laminate technology for extremely broad chemical protection

•Multi-hazard protection: AlphaTec 53-002 provides next generational chemical protection whilst delivering secondary hazard protection, like mechanical hazards.

•Comfort and performance: Unique donning and doffing layer to allow ease of use

• Neoprene and laminate film coating with MICROCHEM™ barrier tecnology
• 14” (350mm) length
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, ABCEFGHIJKLMNOPST
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 1111X
• Level 1- Abrasion
• Level 1- Cut Resistance
• Level 1- Tear Resistance
• Level 1- Puncture
• Level X- ISO 13997 Cut Resistance

•Extreme Chemical protection:AlphaTec® 53-002 gloves achieving 17 out of 18 chemicals on EN 374:2016 with 16 being at class 6 >480 minutes and 16 out of 18 > class 2 against ASTM F739 with a 10x lower limit to pass.

•Elevated comfort and dexterity: unique manufacturing process for optimized fit with raised diamond grip for secure performance in a wide range of scenarios.

•Improved durability: They also possess EN 388- compliant abrasion resistance for better mechanical protection.

•AlphaTec® 53-003 gloves satisfy EN 407 contact heat level 1 (contact heat approved up to 100°C/212°F) , and anti-static according to EN 1149-3 standards preventing workplace injuries.

•MICROCHEM™ Chemical Barrier Technology: Unique multi-layer rubber polymer and plastic laminate technology for extremely broad chemical protection

•Multi-hazard protection: AlphaTec 53-003 provides next generational chemical protection whilst delivering secondary hazard protection, like mechanical and heat hazards.
•comfort and sweat management: Unique manufacturing process and nylon liner support to enhance comfort during use.

• Neoprene and laminate film coating with MICROCHEM™ barrier technology
•Nylon Liner
• 14” (350mm) length
• EN 407 Protective gloves against thermal risks X1XXXX
• EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, ABCEFGHIJKLMNOPST
• EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks
• EN 388:2016 Protective gloves against mechanical risks 2121X
• Level 2- Abrasion
• Level 1- Cut Resistance
• Level 2- Tear Resistance
• Level 1- Puncture
• Level X- ISO 13997 Cut Resistance

100% Polyester with PU membrane
145 gsm fabric weight
100% Polyester padding 100gsm
Light weight jacket.
Fully taped seams
Ergonomic hood with vertical and horizontal drawstring adjustments and stiff hood peak
Full length heavy duty laminated water resistant zip with chin protector
Soft touch zip pulls on all zips
Right breast pocket with laminated water resistant zip
Two lower laminated water resistant zip pockets
One internal left breast pocket
Internal lycra cuffs with thumb holes
Hook and Loop adjustable cuffs

100% Polyester with PU membrane
145 gsm fabric weight
Light weight trouser.
Level 4 Water penetration resistance with 20,000Pa
Level 4 breathability with an Ret of 10.2
Fully taped seams
Fully elasticated waist
Two hip laminated water resistant zip pockets
Two bellowed combat pockets with hook & loop storm flap closure to each leg
Lower Leg bellows with laminated water resistant zip

100% Polyester with PU membrane
145 gsm fabric weight
Light weight jacket.
Level 4 Water penetration resistance with 20,000Pa
Level 4 breathability with an Ret of 10.2
Fully taped seams
Ergonomic hood with vertical and horizontal drawstring adjustments and stiff hood peak
Full length heavy duty laminated water resistant zip with chin protector
Soft touch zip pulls on all zips
Right breast pocket with laminated water resistant zip
Two lower laminated water resistant zip pockets
One internal left breast pocket
Internal lycra cuffs with thumb holes
Hook and Loop adjustable cuffs

• EN-certified metatarsal and ankle protection keeps you safe for the toughest jobs
• Dunlop’s Acifort provides extra chemical protection from fuel and acids
• Specially formulated Acifort outlasts the competition
• SR rated outsole designed for maximum grip on the toughest terrains
• Tread wear indicator to monitor outsole performance
• Dual-density mid layer absorbs impact energy with every step
• Steel toecap protection
• Steel midsole protection
•Comfort Insole for all day comfort
• Energy absorbing sole
• EN ISO 20345:2022 S5 M AN SR FO

• 82% Polyester, 18% Spandex 220g
• Branded waistband
• New logo branding
• Athletic fit
• Sold as a set

P1 R D particulate filter for protection against non toxic dusts, fumes and water/oil based mists/aerosols 4 x WEL
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® particulate filters can either be connected to the EasyLock® gas cartridges or directly with the mask body.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
• EN143:2007
• EN14387:2008
1 BOX = 20 FILTERS (NOT PAIRS)

P2 R D particulate filter for protection against toxic dusts, fumes and water/oil based mists/aerosols 10 x WEL
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® particulate filters can either be connected to the EasyLock® gas cartridges or directly with the mask body.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
• EN143:2007
• EN14387:2008
1 BOX = 20 FILTERS (NOT PAIRS)

P2 R D + Ozone particulate filter.
In addition to the particle filtering efficiency these filters also offer protection against ozone; at 1000ppb ozone a maximum use time of 8h.
P2 R D for protection against toxic dusts, fumes and water/oil based mists/aerosols 10 x WEL
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® particulate filters can either be connected to the EasyLock® gas cartridges or directly with the mask body.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
1 BOX =12 FILTERS (NOT PAIRS)

P3 R D particulate filter against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 20 x WEL
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® particulate filters can either be connected to the EasyLock® gas cartridges or directly with the mask body.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
1 BOX = 12 FILTERS (NOT PAIRS)

P3 R D + Ozone particulate filter.
In addition to the particle filtering efficiency these filters also offer protection against ozone; at 1000ppb ozone a maximum use time of 8h.
P3 protection against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 20 x WEL
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® particulate filters can either be connected to the EasyLock® gas cartridges or directly with the mask body.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
1 BOX = 12 FILTERS (NOT PAIRS)

A1 organic gas [Bp>65°C], 1000ppm.
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® gas filters can either be used on their own or combined with the EasyLock® particulate filters.

Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.

1 BOX = 10 FILTERS (NOT PAIRS)

A2 organic gas [Bp>65oC], 5000ppm.
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® gas filters can either be used on their own or combined with the EasyLock® particulate filters.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
1 BOX = 8 FILTERS (NOT PAIRS)

ABE1 organic, inorganic and acid gases [Bp>65°C].
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® gas filters can either be used on their own or combined with the EasyLock® particulate filters.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
• EN14387:2008
1 BOX = 10 FILTERS (NOT PAIRS)

ABEK1 organic, inorganic, ammonia and acid gases [Bp>65°C].
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® gas filters can either be used on their own or combined with the EasyLock® particulate filters.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
1 BOX = 10 FILTERS (NOT PAIRS)

ABEK1P3 R Pre-assembled gas & particulate filter.
ABEK1 for protection against organic, inorganic, ammonia and acid gases [Bp>65°C]. P3 protection against harmful and carcinogenic dusts, fumes and water/oil based mists/aerosols 10 x WEL
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® particulate filters can either be connected to the EasyLock® gas cartridges or directly with the mask body.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
1 BOX = 6 FILTERS (NOT PAIRS)

AX organic gas [Bp<65°C].
Single use filter.
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® gas filters can either be used on their own or combined with the EasyLock® particulate filters.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.

1 BOX = 8 FILTERS (NOT PAIRS)

ABEK2 organic, inorganic, ammonia and acid gases [Bp>65°C] 5000ppm
Revolutionary EasyLock filter system with no additional clips or holders.
Different gas and particulate filters can be combined.
EasyLock® gas filters can either be used on their own or combined with the EasyLock® particulate filters.
Any combination of filters possible, simply click together, there is no need for additional clips or filter holders.
1 BOX = 8 FILTERS (NOT PAIRS)