Fall Arrest — Lanyards

3M™ DBI-SALA® Nano-Lok™ Personal Self Retracting Lifeline, 3101208 is made from 19 mm (3/4") Dyneema® fibre and polyester web. Our 1.8 m single-leg lifeline has an aluminium rebar hook end, a quick connector for harness mounting and a smart-activating brake system.

• Extremely compact and lightweight single-leg personal self-retracting lifeline designed for working at height
• Smart activating brake system provides fall clearance as low as 1.2 m (4 ft.) - up to 4 m (13 ft.) less than lanyards
• Lightweight speed connect system reduces connect and disconnect time by up to 60%
• Durable nitrile rubber energy absorber cover designed to last 4 times longer than previous version
• Reduced energy absorber size is more user friendly and convenient compared to previous version
• 19 mm (3/4") Dyneema® fibre and polyester web lifeline
• AAF (Average Arrest Force) 400 daN & MAF (Maximum Arrest Force) 600 daN
• Equipped with 3M™ Connected Safety ID (CSID), a pre-programed RFID tag that makes it easier to track and manage equipment using the 3M™ Inspection and Asset Management System (system available by subscription)
• Weight capacity: Single User - 140 KG

EN360:2002

Our 3M™ Protecta® rope connecting lanyards are an ideal solution for the connecting element in a restraint system. Made from polyamide braided rope with safety stitching. Rope diameter 10.5mm.

• Use a 3M™ Protecta® Rope Restraint Lanyard as part of a restraint system to prevent the user from moving into an area where they may be exposed to a fall
• Sewn terminations with heat shrink tube protection provide greater durability and long product service life
• Single Leg
• Anchor connection type: Snap Hook
• Harness connection type: Snap Hook
• Length: 2.00 m

EN354:2010
EN365:2004

• Durable 1680D shock absorbing poly webbing
• Aluminium alloy carabiner with captive eye
• Treaded loop end that grips the tool when attached
• Low-profile lightweight design reduces snag hazards

• Size: Standard 35"- 42" (89 -110cm)

• Elastic maintains snug fit
• Pull-on design provides easy on/off
• One size fits all
• Stainless steel (#304) carabiner
• Tuck-away pocket to keep connector when not in use

• Polyester webbing cuff secures to wrist
• Energy-absorbing ribbed pull cord
• Adjustable barrel lock for tool attachment
• Short length improves the drop clearance needed
• Wrist Measurement S/M 5" - 7" (13cm - 18cm)
• Wrist Measurement L/XL 7" - 8½" (18cm - 22cm)

• Constructed with PU covered aircraft cable
• Stainless steel carabiners (#304)
• Coil design prevents snag and tangle hazards
• Swivelling design prevents tangles and fast recoil
• Extended length 50" (127cm)
• Maximum safe working capacity: 5lbs (2.26kg)

• Constructed with PU covered aircraft cable
• Stainless steel carabiners (#304)
• Coil design prevents snag and tangle hazards
• Swivelling design prevents tangles and fast recoil
• Extended length 50" (127cm)
• Maximum safe working capacity: 2lbs (0.9kg)

• Comfortable high-stretch elastic material
• Easily attaches to hard hats and other headwear
• Quick connect clamp attaches securely to fabric

Fall Arrester
• Retractable fall arrest with 50mm webbing.
• Maximum length: 2.5 meters
• Incorporating a protective casing and Energy Absorber (45mm)
• Minimum breaking strength >15kN
• Conforms to EN360:2002

Energy absorbing lanyard with Scaff Hook.
• Length - 1.5 meters.
• 44mm wide polyester webbing which reduces the impact of fall to less than 6kN.
• Loops protected by an abrasion resistant tubular webbing.
• Conforms to EN355:2002 and tested per VG11 of PPE Directive 89/686/EEC.

SHOCK ABSORBING WEBBING LANYARD
• 1.8 mtr (Model: FA 30 304 18)
• 30mm wide webbing lanyard
• 35mm webbing shock absorber
• Karabiner at one end and scaffold hook at the other end
• Loops protected by abrasion resistant tubular webbing

Conforms to EN 355:2002 and tested as per VG 11
of PPE Directive 89/686/EEC

• 44mm wide elastic webbing
• 35mm wide shock absorber
• Karabiner at one end and scaffold hook at the other
• Loops protected by an abrasion resistant tubular webbing
• Energy absorber in 35 mm wide webbing which reduces the impact of the fall less than 6 kN
• 44 mm wide polyester expandable elasticated webbing lanyard
• Expanded length : 1.5 m , Relaxed length : 1 m

• 12mm Kernmantle rope with snap hook at one end and scaffold hook at the other end
• Loops protected by abrasion resistant thimbles
• Stitching protected by strong transparent sleeve
• Minimum breaking strength 22 kN
• Conforms to: EN 355

• Work Positioning Webbing Lanyard with Ring Adjuster
• Loops protected by an abrasion resistant tubular webbing
• Steel Karabiner at one end and steel snap hook at the other end
• Made up of 30mm diam polyester webbing
• Length 2.00 metres maximum
• Webbing: - Polyester
• Connector - Steel
• Ring Adjuster - Forged Alloy Steel
• Conforms to: EN 358:1999

The MSA lanyards are available in web and kernmantel rope configurations with a variety of connectors. Energy-absorbing lanyards provide a means of connection between the fall arrest attachment of MSA full body harnesses and a qualified anchorage pont. The energy absorber keeps fall arrest forces below 6 kN.

• Single leg configuration, twin-leg versions also available
• The Loops at the end are protected by an abrasion resistant covering to prevent the webbing from being damaged by the metallic contact of the connector
• Curved design of the scaffold hook gate allowing a more comfortable grip
• 30 mm polyester webbing
• Galvanized alloy steel screwgate carabiner
• The screwgate carabiner has a minimum breaking strength of 25Kn with a gate opening of 18mm
• Galvanized alloy steel scaffolding hook
• The scaffolding hook has a minimum breaking strength of 23 kN with a gate opening of 50.8mm
• Maximum arrest force of 6Kn
• The screwgate carabiner has a minimum breaking strength of 25Kn with a gate opening of 18mm

The MSA lanyards are available in web and kernmantel rope configurations with a variety of connectors. Energy-absorbing lanyards provide a means of connection between the fall arrest attachment of MSA full body harnesses and a qualified anchorage point. The energy absorber keeps fall arrest forces below 6 kN.

• Twin leg configuration
• The loops at the ends are protected by an abrasion resistant covering Prevents the webbing from being damaged by the metallic contact of the connector
• curved design of the gate of the scaffold hook Allows more comfortable grip
• 30mm Polyester webbing
• Galvanised alloy steel screw gate karabiner and scaffolding hook

The Scaffolding hook has a minimum breaking strength: 23 kN, Gate opening: 50.8 mm
The Screw gate Karabiner has a minimum breaking strength: 25 kN, Gate opening: 18 mm

• 35mm width Nylon tear webbing shock absorber

Conforms to EN 355:2002 Personal protective equipment against falls from a height. Energy absorbers

The MSA lanyards are available in web and kernmantel rope configurations with a variety of connectors. Energy-absorbing lanyards provide a means of connection between the fall arrest attachment of MSA full body harnesses and a qualified anchorage pont. The energy absorber keeps fall arrest forces below 6 kN.

• Single leg configuration, twin-leg options also available
• Leading edge approved for use in leading edge application
• Cross stich and a strong transparent covering sleeve to protect the ends and makes the stitches visible for easy inspection
• Abrasion resistant thimble at the end of the loops to prevent the rope from being damaged by the metallic contact of the connector
• A colour tracer strand that loses it colour in due course of time showing that the lanyard is now unfit for further use
• 11mm Nylon Kernmantel rope
• Galvanized alloy steel twist-lock carabiner
• The Carabiner has a minimum breaking strength of 23kN with a gate opening of 60mm
• Aluminum Alloy Scaffolding hook
• The Scaffolding hook has a minimum breaking strength of 23 kN with a gate opening of 16 mm
• Maximum arrest force of 6kN
• Conforms to EN 352:2002 Personal protective equipment against falls from a height. Energy absorbers

The V-TEC 1.8M Mini retractable lanyard is the most compact & lightweight self-retracting lanyard ever developed using multiple spring radial energy-absorbing technology. This new design eliminates the need for an external energy-absorber outside of the housing making it the smallest personal fall limiter on the market.
• Integral energy absorber
• Requires zero recalibration or adjustment
• The energy absorber is completely sealed from external contaminants
• A fully rotating attachment point for complete flexibility –both 360° and 180° providing a free range of motion
• Structurally reinforced pawl mechanism through precision engineering
• Highly durable polycarbonate case houses the SRL, and its transparency allows for easy visual inspection of critical internal components
• High quality components manufactured from high-grade stainless steel and engineered plastics
• Single Leg
• Aluminium rebar lightweight hook anchorage point
• 60-140KG including tool weight limit
• EN360:2002 Personal protective equipment against falls from a height. Retractable type fall arresters

• 2.0 Metres webbing.
• M10T Karabiners.
• EN 354 & EN 355.